Eurobead


Eurobead is a high quality cavity wall insulation that can be used on all dwellings built with a cavity wall construction. Eurobead is a bonded bead system which consists of a expanded polystyrene material injected in bead form. The bead is coated in an air drying adhesive which enables the bead to flow freely through the cavity ensuring a full fill of the cavity wall. Eurobead is a closed cell structure. Water cannot penetrate through the material, which allows any moisture within the cavity to naturally drain due to gravity. When Eurobead is installed on new build dwellings it is completed prior to internal plastering and on existing dwellings can be carried out at any time.

Installation

Figure 1: Cavity is measured and assessed by our technical team.
Figure 2: The Insulation Technicians follow a strict drilling pattern set out by the Irish Agreement Board (IAB) to insure all areas of the cavity if filled.
Figure 3: Eurobead is injected into the cavity by compressed air and as the bead enters the cavity it is lightly coated with an adhesive.
Figure 4: Combined with our specialised drilling pattern and light coat of adhesive material, Eurobead gives a guaranteed fill and bonded cavity for a warm, energy efficient home.

Advantages

There are many advantages to having your house insulated with Eurobead. Some of these advantages include:

  • knowing your home has been insulated by a fully trained installer
  • knowing your home has been insulated with a high quality insulation
  • fuel saving of up to 40% per year
For more information, please click on our link to Eurobead's website. Click here


Click here
Click here
Click here
Click here
Click here
Click here